Duplicate Jetways.

Fresjay76 · Post by **Fresjay76** » Wed Jul 22, 2020 1:11 pm

Hello,

I searched around and could only find 1 post about this issue but is was 5 years old meaning I must have messed something up somewhere. I installed KMDW into V5 and patched it. My issue now is I have duplicate Jetways. Each gate has 2 now with 1 of them floating in the air not connected to the building. Any help appreciated as all I need is pointed in the right direction and I can likely sort it quickly.

Thanks in advance,
Jason

Fresjay76 · Post by **Fresjay76** » Wed Jul 22, 2020 1:40 pm

Here is a screen shot of the issue.

Fresjay76 · Post by **Fresjay76** » Wed Jul 22, 2020 2:32 pm

As a side note one is GSX the other I am presuming is the stock. The GSX ones being the floating ones. If I shut off the BGL's for the default FlyTampa ones the portal on the side of the build is left while the GSX ones are still floating. I have patched it after I installed KMDW. But didn't seem to work like it did for YSSY or the others that require a patch to be V5 compatible.

Jason

Fresjay76 · Post by **Fresjay76** » Wed Jul 22, 2020 5:20 pm

Ok so now I have tried the iniBuilds GSX profile and fixes and now I am left a basically clean looking terminal but the GSX jetways are still floating not connected or in some cases partially inside the terminal. Still stuck but seems making progress.

Jason

Post by **kohli153** » Tue Jul 28, 2020 4:38 am

Hello,

I searched around and could only find 1 post about this issue but is was 5 years old meaning I must have messed something up somewhere. I installed KMDW into V5 and patched it. My issue now is I have duplicate Jetways. Each gate has 2 now with 1 of them floating in the air not connected to the building. Any help appreciated as all I need is pointed in the right direction and I can likely sort it quickly.

Thanks in advance,

Post by **martin[flytampa]** » Thu Jul 30, 2020 12:56 am

If using 3rd party jeyways for KMDW, check if they align with the stock KMDW building. They may not be adjusted to work with our Addon.

Fresjay76 · Post by **Fresjay76** » Mon Dec 13, 2021 3:08 pm

Ok I am bringing this to the front again. Maybe Martin can comment. I still have floating not connected to the buildings jetways. A duplicate jetway here and there and I now have double textures. Any thoughts on this? Kinda frustrating as this is the only FlyTampa scenery giving me issues in V5.2HF1.

Thanks,
Jason

Post by **martin[flytampa]** » Fri Dec 24, 2021 12:05 am

Fresjay76 wrote: ↑Mon Dec 13, 2021 3:08 pm Ok I am bringing this to the front again. Maybe Martin can comment. I still have floating not connected to the buildings jetways. A duplicate jetway here and there and I now have double textures. Any thoughts on this? Kinda frustrating as this is the only FlyTampa scenery giving me issues in V5.2HF1.

Thanks,
Jason

All jetways in your screenshot, with the exception of the one in the bottom middle with the grey head, are not ours, nor are they stock P3D jetways. You must have some other addon/bgl file in your installation that is generating these jetway.

Post by **matth27** » Thu Oct 27, 2022 11:46 am

Looks like its been almost year since the last post but had this issue and figured out what was wrong. These other jetways are coming from Drzewiecki design Chicago X. All I did to get rid of them was to rerun the installer for Chicago X and they were gone. But make sure Midway is unselected when running the installer.

Duplicate Jetways.

Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.

Re: Duplicate Jetways.