Vienna Version 2.5 (FSX & P3D2)

Post Reply
martin[flytampa]
Site Admin
Posts: 5058

Vienna Version 2.5 (FSX & P3D2)

Post by martin[flytampa] » Thu Dec 19, 2013 3:08 am

Vienna Version 2.5 (FSX & P3D2)

Added Prepar3D V2 support
Added custom Runway Lighting
Updated Aerial/Grass-area Textures
New higher-res ground detail Textures
Added Volumetric Grass
Added Option to color-match FTX-Global
Improved Refinery smoke FX
Added animated Apron Vehlicles
Added Tower Strobes
Added Taxiway TL39/41 blue and orange
Added IK Jetway Option
Added wet ground FX
Added ground oil FX
Added Floodlight FX
Improved FSX DX10 compatibility (Steve's DX10 Fixer Required)


- To update Vienna for FSX, download the Update below.
http://www.flytampa.org/dwl/FlyTampa_Vi ... ate_25.exe

- To install into Prepar3D V2, a new full Installer is required. To get this, send us an email with your name (as purchased), requesting a new full Installer, or login your Simmarket account and look for the new Vienna file.

Aerosoft's "Mega-Vienna" cannot be updated by our Update/Installers, please wait for Aerosoft to release their own new files.

AES will include support for Vienna 2.5 in the next version, estimated to be released before Christmas.
martin[flytampa]
Site Admin
Posts: 5058

Re: Vienna Version 2.5 (FSX & P3D2)

Post by martin[flytampa] » Thu Dec 19, 2013 3:10 am

Screenshots with FTX-Global, World of AI and SweetFX
Attachments
loww01.jpg
loww01.jpg (348.46 KiB) Viewed 35028 times
loww02.jpg
loww02.jpg (310.81 KiB) Viewed 35028 times
loww03.jpg
loww03.jpg (411.97 KiB) Viewed 35028 times
loww04.jpg
loww04.jpg (443.84 KiB) Viewed 35028 times
loww05.jpg
loww05.jpg (431.57 KiB) Viewed 35028 times
loww06.jpg
loww06.jpg (287.53 KiB) Viewed 35028 times
loww07.jpg
loww07.jpg (220.33 KiB) Viewed 35028 times
Sohnemann83
Posts: 3

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Sohnemann83 » Thu Dec 19, 2013 1:00 pm

Hallo,

ich habe euch eine Email mit meinen Daten geschrieben.

Ich habe das Problem, das der Installer vom FSX Update 2.5 die vorherige Wien Version nicht findet.

Diese wurde aber mit dem original Aerosoft Installer installiert...

Danke für die Hilfe:-)
Sohnemann83
Posts: 3

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Sohnemann83 » Thu Dec 19, 2013 1:02 pm

Sorry,
habe den Text oben nicht genau gelesen.

Werde warten bis Aerosoft den Installer updated

nochmals sorry
EasyRider
Posts: 21

Re: Vienna Version 2.5 (FSX & P3D2)

Post by EasyRider » Thu Dec 19, 2013 2:26 pm

Thanks for the new version of Vienna!

Sincerely,

Sebastian
Gordon1985
Posts: 8

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Gordon1985 » Thu Dec 19, 2013 2:47 pm

P3Dv2 compatibly LOWW...Brilliant...off to Simmarket I go with visa card in hand :D
driver101
Posts: 4

Re: Vienna Version 2.5 (FSX & P3D2)

Post by driver101 » Thu Dec 19, 2013 4:03 pm

Thank you guys!!!!!!

This is awsome!!! It Looks fantatstic. The best payware Airport for FSX!

Cheers Jan
trainler
Posts: 12

Re: Vienna Version 2.5 (FSX & P3D2)

Post by trainler » Thu Dec 19, 2013 5:29 pm

Many many thanks for the update - but I noticed a little error on TL40 - on the new update it continues all the way until abeam F04/H41 - but in reality TL40 ends abeam H47.

See on this real world layout plan - please click on the images for fullscale
Image

And another thing - would be great if you could correct that. South of "Skylink" the parking position markings (the placement of the lines) are incorrect. They are at the wrong place - sometimes too close together. And there are some lines which should be dashed but are solid.

If you compare this screenshot:

Image

And on this real world airport layout you can see what I mean:
Image

I've also created a layover:

Image

It is a problem when controlling online - such as on IVAO and VATSIM - because it is difficult to assign parking positions to heavy aircraft types. If you place one heavy wrong, it "screws up" the rest of the terminal because of the wingspan of the heavy.

Many many thanks again for the update - I just hope that you are going to correct the parking positions, because they are a very important part of the airport.
LuisKMIA
Posts: 11

Re: Vienna Version 2.5 (FSX & P3D2)

Post by LuisKMIA » Thu Dec 19, 2013 7:47 pm

Thanks as always for continuing to update your great airports!

Luis
christian1974
Posts: 27

Re: Vienna Version 2.5 (FSX & P3D2)

Post by christian1974 » Fri Dec 20, 2013 12:33 am

Hi Martin.
Just for information: is the offered file for FSX a new full installer, or is the file intented to be installed over an installed v2 version.
sonicwave
Posts: 11

Re: Vienna Version 2.5 (FSX & P3D2)

Post by sonicwave » Fri Dec 20, 2013 2:22 am

What a great update from FlyTampa here!
Thank You very, very, very much for all the time and effort that went into it!
Really very much appreciated!
Absolutely amazing!
Cheers, Christoph

trainler wrote:Many many thanks for the update - but I noticed a little error on TL40 - on the new update it continues all the way until abeam F04/H41 - but in reality TL40 ends abeam H47.
[...]
Many many thanks again for the update - I just hope that you are going to correct the parking positions, because they are a very important part of the airport.
Now this is some very detailed and interesting info here!
Joker767
Posts: 16

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Joker767 » Fri Dec 20, 2013 11:02 am

Dear FlyTampa Team,

thank you for this update - was really surprised and delighted, when I discovered this update. Really nice, that you always put Vienna to your actual stand of scenery design technique.

However, I found some errors with the update: First of all, it would be really great, if you can fix the points stated by trainler, especially the placement of the gate lines on the south side of the Skylink ("Check in 3").

I hope not to be rude or disrespectful, when I post some further errors, which were discovered after the update (some of them were also there before the update):
  • Can't select H41 as gate in the FS Menu
  • DME is not reading 0 when touching down (offset of about 2 nm) See here & here
  • The outermarker of all runways are still here - in real, they all have been removed in the last years
  • The Runway lights are not visible during daylight, which is very critical during low visibility (maybe you can add the "Alternative Runway Lighting" box during the installing process like on the TNCM installer) - see screenshot below:
    Image
  • The new 3D light effects (floodlight.fx) + the tower strobe is visible through the fog - see screenshot below:
    Image
  • Orange & Blue Lines are too close together - it is impossible to taxi on both simultaneously on both lines with A320/B737 aircraft, which is possible in real. I've made an overlay with a real aerial image and a FSX aerial image. The orange/blue lines are visible in both aerial images and are the ones of the scenery - see screenshot (.gif) below:
    Image
Please don't see this post as an offense, but it would be really really nice, if these points can be fixed.

Thank you again for this update!!! :)
Benncpp15
Posts: 161

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Benncpp15 » Fri Dec 20, 2013 11:30 am

Joker767 wrote:Dear FlyTampa Team,

thank you for this update - was really surprised and delighted, when I discovered this update. Really nice, that you always put Vienna to your actual stand of scenery design technique.

However, I found some errors with the update: First of all, it would be really great, if you can fix the points stated by trainler, especially the placement of the gate lines on the south side of the Skylink ("Check in 3").

I hope not to be rude or disrespectful, when I post some further errors, which were discovered after the update (some of them were also there before the update):
  • Can't select H41 as gate in the FS Menu
  • DME is not reading 0 when touching down (offset of about 2 nm) See [url=http://www.flytampa.org/forum
  • The outermarker of all runways are still here - in real, they all have been removed in the last years
  • The Runway lights are not visible during daylight, which is very critical during low visibility (maybe you can add the "Alternative Runway Lighting" box during the installing process like on the TNCM installer) - [
  • The new 3D light effects (floodlight.fx) + the tower strobe is visible through the fog -
    [[/url]
  • Orange & Blue Lines are too close together - it is impossible to taxi on both simultaneously on both lines with A320/B737 aircraft, which is possible in real. I've made an overlay with a real aerial image and a FSX aerial image. T
    Please don't see this post as an offense, but it would be really really nice, if these points can be fixed.

    Thank you again for this update!!! :)
Don't you think this is a bit anal dude? I couldn't care less about a few lines as this was a grade A airport updated for free. Besides, your image is too large which is why the lines look wider a part.
Joker767
Posts: 16

Re: Vienna Version 2.5 (FSX & P3D2)

Post by Joker767 » Fri Dec 20, 2013 11:35 am

Have you read my whole post?
I hope not to be rude or disrespectful, when I post some further errors
+
Please don't see this post as an offense, but it would be really really nice, if these points can be fixed.
This report may be "anal", how you call it, in your eyes. The others and me want to help with posting things like this, don't know what you want to do with your post!
Post Reply