SODE jetways at A20 and A21 too short?

[airbadger]

Looks like the jetways at gates A20 and A21 are too short to connect if the aircraft is on centerline. Is there any way this could be fixed?

[george[flytampa]]

Not flexible enough. One of the first jetways I tried.

Try the attached files. It should make a massive improvment.

Unzip the attached folder & replace the one in.
C:\ProgramData\12bPilot\SODE\SimObjects\Flytampa_KBOS\Model.Jetway_A_KBOS

Restart P3D.

Please let me know if it works.

[airbadger]

Not flexible enough. One of the first jetways I tried.

Try the attached files. It should make a massive improvment.

Unzip the attached folder & replace the one in.
C:\ProgramData\12bPilot\SODE\SimObjects\Flytampa_KBOS\Model.Jetway_A_KBOS

Restart P3D.

Please let me know if it works.

Works great now! Thanks for the quick response.

[highways1]

I just wanted to add onto this that B25 is unreachable and am guessing that B24 might be tough as well. Could these gates be checked please?

[stevefocus]

Same with E7 just arrived there in 744 could not reach L1 or L2

[george[flytampa]]

Attached update files that should improve the B gates.

Unzip the attached folder & replace the one in.
C:\ProgramData\12bPilot\SODE\SimObjects\Flytampa_KBOS\

Please let me know if it works & we'll add it to the 1.1 patch so you don't have to install these file separately again.

[highways1]

Hi George, at least for the B gates it worked perfectly. Thanks for the updated files.

[mcparr42]

These updates were also a fix for me for the A&B gates that were not flexible enough. I'm having the same problem though with C21 and C31. All the other C jetways are connecting properly besides these two. Thanks again for another great scenery.

[mcparr42]

After some trial and error I found that the problem for me was not the jetways but rather the AFCAD file. After a slight realignment both C21 and C31 are now properly connecting to the ai traffic.