Board index » FlyTampa » General Discussion

Post
 martin[flytampa] (Sat May 27, 2017 12:26 am)

Site Admin | Posts: 5201 | Location: Tampa/FL
Prepar3D-v4-Large-Logo.png
Prepar3D-v4-Large-Logo.png (59.36 KiB) Viewed 161532 times

These ZIP updates get added to the latest version of each airport, current versions are listed here. More updates will become available in the following days. When extracting the ZIP files, it will ask to overwrite/replace existing files. If it does not ask to replace, that means you are extracting them in the wrong folder.

Amsterdam
http://www.flytampa.org/dwl/EHAM_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "East" under Amsterdam Airport setup. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Amsterdam/scenery/ 8 files named ******_papi.bgl

Corfu
So good it needs no Patch.

Sydney
http://www.flytampa.org/dwl/YSSY_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
or manually copy the BGL files to Sydney\scenery
Delete: Prepar3D/FlyTampa/Sydney/scenery/ 6 files named PapiHalos*****.bgl

Toronto Apr 29 2018
Updated for P3Dv4, full Installer requires original serial key. During installation the Libraries will be updated as well.
http://flytampa.org/forum/viewtopic.php?f=29&t=12053

Copengagen
http://www.flytampa.org/dwl/EKCH_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure to select "North-East winds" under Copenhagen Airport operations. You can change that option again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Copenhagen/scenery/ 5 files named ******_papi.bgl

Montreal Re-Uploaded December 23, fixed seasonal textures
http://www.flytampa.org/dwl/CYUL_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
or manually copy the BGL files to Montreal\Scenery & DDS files to Montreal\Texture folder.
Delete: Prepar3D/FlyTampa/Montreal/scenery/ 2 files named Rwy06R-papi.bgl & Rwy28-papi.bgl
Failure to delete Rwy06R-papi.bgl & Rwy28-papi.bgl can result in CTD.


Dubai-Rebooted
http://www.flytampa.org/dwl/OMDB_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Dubai/scenery/ 4 files named ******papi.bgl

Athens Re-Uploaded August 31
http://www.flytampa.org/dwl/LGAV_P3Dv4_Patch.zip
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Athens/scenery/ 4 files named ******-papi.bgl

Tampa-Rebooted
http://www.flytampa.org/dwl/KTPA_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Tampa/scenery/ 6 files named ******papi.bgl

Buffalo
http://www.flytampa.org/dwl/KBUF_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D root folder, not the FlyTampa subfolder like the other Patches.

Grenadines
Not recommended that you install Grenadines at this point, as it will not work. If you have installed it already and something else isn't working, go into the Prepar3D V4/Autogen folder, and restore the backup file default.xml(before_FlyTampa_Grenadines) to default.xml.

KaiTak Jul 21 2018
Updated for P3Dv4, full Installer requires original serial key. During installation the Libraries will be updated as well.
http://flytampa.org/forum/viewtopic.php?f=13&t=12054

StMaarten Apr 29 2018
Updated for P3Dv4, full Installer requires original serial key. During installation the Libraries will be updated as well.
http://flytampa.org/forum/viewtopic.php?f=14&t=12055

Vienna Apr 29 2018
Updated for P3Dv4, full Installer requires original serial key. During installation the Libraries will be updated as well.
http://flytampa.org/forum/viewtopic.php?f=13&t=12054

Midway
http://www.flytampa.org/dwl/KMDW_P3Dv4_Patch.zip
Install Notes: Run the FlyTampa-Config-Tool and make sure that "3D Grass" is enabled. You can switch it off again after applying the Update files.
Extract ZIP to Prepar3D/FlyTampa/
Delete: Prepar3D/FlyTampa/Midway/scenery/ 7 files with the named ******_papi_lights.bgl

Libraries Jan 4 2018
http://www.flytampa.org/dwl/FlyTampa_Co ... es_P3D.exe
Post
 JSilva3284 (Sat May 27, 2017 5:55 am)

Posts: 2
Already Prepar3D. Thanks.
Post
 mohammedkaafar (Sat May 27, 2017 10:07 am)

Posts: 24
great job, but are you going to update the installers as well?
Post
 martin[flytampa] (Sat May 27, 2017 3:48 pm)

Site Admin | Posts: 5201 | Location: Tampa/FL
mohammedkaafar wrote:great job, but are you going to update the installers as well?


At some point yes, but probably not anytime soon.
Post
 olsbluesfan (Sun May 28, 2017 3:53 am)

Posts: 27
Can we update these now or wait till V4? Thanks.
Post
 martin[flytampa] (Sun May 28, 2017 3:21 pm)

Site Admin | Posts: 5201 | Location: Tampa/FL
olsbluesfan wrote:Can we update these now or wait till V4? Thanks.


These are V4 compatibility Updates only, they shouldn't be applied to V3 or FSX. We are only testing these for V4 compatibility at this point.
Post
 mohammedkaafar (Mon May 29, 2017 6:52 am)

Posts: 24
Does this mean that we need to point p3d v3 installers to p3d v4 folder to install flytampa sceneries?
Post
 Ifikratis (Mon May 29, 2017 4:16 pm)

Posts: 11
Excellent! Thank you for your amazing support FlyTampa!
Post
 windowseat73 (Mon May 29, 2017 6:12 pm)

Posts: 2
Wow awesome, thanks for this.

Will you be doing TPA, MDW and BOS as well? These are some of my favorite sceneries, especially MDW as it's my home airport:-)

John
Post
 george[flytampa] (Mon May 29, 2017 6:27 pm)

Site Admin | Posts: 3294 | Location: Southampton, UK
windowseat73 wrote:Wow awesome, thanks for this.

Will you be doing TPA, MDW and BOS as well? These are some of my favorite sceneries, especially MDW as it's my home airport:-)

John


The old BOS doesn't work at all in P3D but there is a new version coming out later this year.
viewtopic.php?f=1&t=10289

TPA & MDW are up to Martin. Montreal patch is coming soon followed by Athens.
Post
 windowseat73 (Mon May 29, 2017 8:47 pm)

Posts: 2
Thanks for the info George. For what it's worth, I've been using the old BOS just fine in v3.xx with no real issues to speak of, but I'm really looking forward to the new one. Looks great!

John
Post
 Lude2Envy (Tue May 30, 2017 11:33 am)

Posts: 145 | Location: Philadelphia
martin[flytampa] wrote:
olsbluesfan wrote:Can we update these now or wait till V4? Thanks.


These are V4 compatibility Updates only, they shouldn't be applied to V3 or FSX. We are only testing these for V4 compatibility at this point.


So how do we install? Run the installer pointing to v4 directory and then apply the updates afterwards? Thanks.
Post
 K.S. Weber (Tue May 30, 2017 11:39 am)

Posts: 7
Fingers crossed TPA and BUF make the cut. TPA is the company namesake after all, isn't it? :D
Post
 georgiosgiannoukos (Tue May 30, 2017 1:50 pm)

Posts: 6
I have fsx:se with some flytampa add ons.
Should I reinstall and pointing the p3d v4 ? Or how we do?
Install the latest versions and then apply the zip patches?
Please advise