Vienna 3.0 (Prepar3D V4)

donkey20048
Posts: 31

Re: Vienna 3.0 (Prepar3D V4 only)

Post by donkey20048 » Fri Mar 01, 2019 10:17 am

updated all my sceneries using the universal p3d setup exr from the forum.

I am currently parked at LOWW with fog and there are no airport lights activated from fog

can someone advise
P906
Posts: 41

Re: Vienna 3.0 (Prepar3D V4 only)

Post by P906 » Fri Mar 01, 2019 10:50 am

Hi,

i try to install the LOWW v3.0.exe but downloading the 490 MB content does not work...
It says to contact the support.
Is there a way to get a zip-file of the content and then during install to proof my rights
to install ?

When i start the installer it says that the download time is 4 hours and a few minutes later
there is no data flow anymore....
martin[flytampa]
Site Admin
Posts: 5185

Re: Vienna 3.0 (Prepar3D V4 only)

Post by martin[flytampa] » Fri Mar 01, 2019 10:53 am

How much fog is there? To test, go to Weather, select custom and set visibility to 5mi/8km or less. At that point the runway lights should activate.
donkey20048
Posts: 31

Re: Vienna 3.0 (Prepar3D V4 only)

Post by donkey20048 » Fri Mar 01, 2019 11:08 am

hi martin

thanks for your reply i have tried that and still not getting airport lights turn on. i even went to 1/2 mile and no lights

Image
Image
martin[flytampa]
Site Admin
Posts: 5185

Re: Vienna 3.0 (Prepar3D V4 only)

Post by martin[flytampa] » Fri Mar 01, 2019 7:01 pm

That is P3Dv4.4 correct? Weather Addon of any kind, or just stock P3D?

Check if you have:
Prepar3D v4/FlyTampa/Vienna/scripts/fthalos1.lua

and

Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE.dds
Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE_lm.dds
donkey20048
Posts: 31

Re: Vienna 3.0 (Prepar3D V4 only)

Post by donkey20048 » Sat Mar 02, 2019 2:45 pm

hi martin

yes i use v4.4 and p3d weather using the custom as you asked . i have also tested with just AS foggy theme. Same result

I have the Prepar3D v4/FlyTampa/Vienna/scripts/fthalos1.lua

but i do not have Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE.dds
Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE_lm.dds
P906
Posts: 41

Re: Vienna 3.0 (Prepar3D V4 only)

Post by P906 » Sat Mar 02, 2019 2:46 pm

finally got the download (after 1 hour time).
Screenshot (916).png
Screenshot (916).png (681.79 KiB) Viewed 3879 times
here you can see a "halo" on the white runwaylights.... RWY 29 LOWW - but on all RWY`s

which looks wrong... any solution here ?
Lion
Posts: 4

Re: Vienna 3.0 (Prepar3D V4 only)

Post by Lion » Sat Mar 02, 2019 5:23 pm

Hi all,
I have Vienna 29 installed (P3D v4)
Now I get a message from my vendor that a new update is available and that I first have to uninstall the present scenery.

But I see a "Universal P3D file" with 209KB and a "FSX Vienna 27"file with 339MB
Do I have to install only the Universal one? (and remove the present scenery first??)

thanks for reply,
Gerrit
NBouc
Posts: 19

Re: Vienna 3.0 (Prepar3D V4 only)

Post by NBouc » Sat Mar 02, 2019 5:59 pm

Gerrit, I updated Vienna 2.9 to the new V3.0 this afternoon using the universal setup without uninstalling 2.9 first (updated on top) and everything is OK.

For P3D v4.4, all you need is "FlyTampa_Universal_P3D_Setup.exe". I did the same with all my other P3Dv4 sceneries and all is well. The only time I uninstalled the previous version is when going from a P3D V3 based version to a P3Dv4 version (Corfu).
martin[flytampa]
Site Admin
Posts: 5185

Re: Vienna 3.0 (Prepar3D V4 only)

Post by martin[flytampa] » Sat Mar 02, 2019 6:45 pm

donkey20048 wrote:hi martin

yes i use v4.4 and p3d weather using the custom as you asked . i have also tested with just AS foggy theme. Same result

I have the Prepar3D v4/FlyTampa/Vienna/scripts/fthalos1.lua

but i do not have Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE.dds
Prepar3D v4/FlyTampa/Vienna/scripts/texture/loww_fthalos1ONE_lm.dds
Those missing files is weird. You ran the Universal Installer and saw LOWW 3.0 changelog before installing correct? Can you run the Installer again and see if these 2 files appear afterwards
donkey20048
Posts: 31

Re: Vienna 3.0 (Prepar3D V4 only)

Post by donkey20048 » Sun Mar 03, 2019 4:51 am

hi martin

yes i ran the universal installer and LOWW 3.0 but still do not have those files ive even redownloaded the installer incase it was a bad download but still no change
martin[flytampa]
Site Admin
Posts: 5185

Re: Vienna 3.0 (Prepar3D V4 only)

Post by martin[flytampa] » Sun Mar 03, 2019 10:28 am

I'm attaching these textures, copy to Vienna/scripts/texture/
See if the lights work afterwards.
Attachments
loww3_halos.zip
(66.58 KiB) Downloaded 98 times
P906
Posts: 41

Re: Vienna 3.0 (Prepar3D V4 only)

Post by P906 » Sun Mar 03, 2019 12:02 pm

okay, this file solved it...
exept look here:
Screenshot (921).png
Screenshot (921).png (1.08 MiB) Viewed 3822 times
the red lights (RWY 11) at the RWY end looking wrong and still some
white RWY lights..
donkey20048
Posts: 31

Re: Vienna 3.0 (Prepar3D V4 only)

Post by donkey20048 » Tue Mar 05, 2019 8:27 am

hi martin thanks the runway lights now appear when there is fog. However the actual lights on the airport do not turn on ie taxiways/ apron lights
Post Reply